Neatopricer 4 Installation

1. Connect your PDA to your computer using your Cradle or Sync Cable.

2. Depending on what operating system your computer uses (Windows XP, Windows Vista or Windows 7) you want to make sure your Activesync or Windows Mobile Device Center says Connected. Figure 1.1 is an example of a successfully connected PDA to a computer using Windows Mobile Device Center.

Note: You can check what operating system you are running by right clicking on the My Computer icon and going to Properties.

Figure 1.1

3.If your PDA says connected but you have the option to Set Up Your Device or Connect Your Device Without Setting Up. Go ahead and click Connect Your Device Without Setting Up. Figure 1.2 is an example of a device that is not fully partnered with a computer. It may say connected but the actual sync connection has not been established and therefore the internet will not be shared between your PC and PDA.

Figure 1.2

4. To test if your PDA has successfully connected to the internet, you can click Start>Internet Explorer and browse to a webpage like http://www.google.com. It is important that you are connected to the internet to update your neatopricer. Figure 1.3 shows how to browse to Internet Explorer on your PDA. Figure 1.4 shows a PDA successfully connected to the internet.

Figure 1.3

Figure 1.4

5. Once you have determined you are successfully connected, you can browse to db.neatoscan.com on your PDA using internet explorer as shown in figure 1.5. Once you are at db.neatoscan.com you want to click on the 3.5 Compact Framework ARM link. Figure 1.6 shows the link you need to click first.

Figure 1.5

Figure 1.6

6. Once you have successfully installed the 3.5 Compact Framework ARM Link you will be prompted to restart your device. Go ahead and click the ‘Restart’ button at the bottom left corner when prompted.

7. After your device is back up and running, browse back to db.neatoscan.com and scroll down till you see “Neatopricer 4 Beta” as shown in figure 1.7. Once you click the neatopricer download and let it install you are now upgraded to the new version of neatopricer.

Figure 1.7

8. After it is successfully, installed you will be prompted to register your device. You can register your device by clicking File>Register and entering your username and password associated with your neatoscan.com account.

9. After you have successfully registered your device, you can proceed to download your database. You can do this by clicking the Account tab in Neatopricer and hitting the start button shown below in figure 1.8.

Figure 1.8

10. Congratulations! You have successfully upgraded your neatopricer to the latest version. Please wait for your database to finish downloading before unplugging your device.